Clean Water Changes Everything,

Lehigh Valley Water Quality Service

What’s Really In Your Water?

Clean water matters for your home, your family, and your plants. Aero-Gro helps you understand what your water is doing with reverse osmosis filtration and simple before-and-after testing using the Aero-Gro 5-in-1 Water Quality Meter.

🎁 FREE Aero-Gro 5-in-1 Water Quality Meter
Water Quality Snapshot Before / After
Tap Water TDS 247 ppm Example pre-filtration reading
RO Water TDS 24 ppm Example post-filtration reading
pH 7.1 Balance indicator
EC 48 µS/cm Conductivity indicator
RO filtration + testing Track performance
1. TestCheck your source water.
2. FilterRun water through RO.
3. VerifyCompare the readings.
Clean Water

Better-tasting, more predictable water for daily drinking, cooking, and home use.

RO Filtration

Reverse osmosis can reduce dissolved solids, salts, and many unwanted substances.

5-in-1 Testing

Measure pH, TDS, EC, salinity, and temperature with one handheld meter.

Track Results

Use before-and-after readings to monitor filtration performance over time.

Why Clean Water Matters

Water quality affects more than taste.

Your water touches your coffee, your cooking, your plants, your pets, and your family every day. Knowing what is in it helps you make better decisions.

What could be in your water?

Depending on your location, water source, plumbing, and treatment history, water may contain dissolved minerals, salts, metals, disinfectant byproducts, nitrates, fluoride, chlorine, sediment, or other unwanted substances.

  • Minerals and dissolved solids that affect taste and buildup
  • Salts that can affect plants and hydroponic systems
  • Metals or contaminants that require certified filtration or lab testing to verify
  • Changes in pH, EC, TDS, salinity, and temperature that can be measured at home
Video placeholder Add a video here later explaining what TDS, pH, EC, salinity, and temperature mean — and how RO filtration changes the numbers.
Reverse Osmosis

RO helps remove what basic filtration can leave behind.

Reverse osmosis uses a specialized membrane to reduce dissolved solids and many unwanted substances. It is one of the most recognized ways to create cleaner, more consistent water for the home.

1
Tap water enters the system Source water may contain minerals, salts, sediment, or other dissolved materials.
2
The RO membrane reduces dissolved solids The system helps lower TDS and can reduce many unwanted substances depending on system design and maintenance.
3
The Aero-Gro meter tracks the change Test before and after filtration to see measurable improvements in water quality indicators.

Before Filtration

Tap water can contain dissolved material that affects taste, buildup, and growing performance.

Example TDS reading247 ppm

After RO Filtration

RO-treated water typically shows a major drop in dissolved solids when the system is working properly.

Example TDS reading24 ppm
Important: RO performance depends on water source, system design, membrane condition, filter life, and maintenance. The Aero-Gro meter tracks useful water-quality indicators, but it is not a lab test for every individual contaminant.
pH 7.1Balance check
TDS 24 ppmDissolved solids
EC 48 µS/cmConductivity
72°FTemperature
Aero-Gro 5-in-1 Meter

The simple tool that turns water quality into numbers.

The Aero-Gro 5-in-1 Water Quality Meter helps homeowners and growers understand key water indicators before and after filtration.

pH

Understand acidity or alkalinity, useful for water awareness and plant nutrient uptake.

TDS

Estimate total dissolved solids and compare tap water against filtered water.

EC

Measure electrical conductivity, a key indicator tied to dissolved ions and minerals.

Salinity

Watch salt-related changes that can affect taste, irrigation, and hydroponic performance.

Temperature

Temperature affects readings and matters for consistency in testing and growing.

Filter Tracking

Repeated readings can show changes that may point to filter wear or maintenance needs.

Future Animation

A spot for an animation later.

This area is ready for a future animation showing water moving through an RO system, getting filtered, and then being tested with the Aero-Gro meter.

Recommended animation flow

  • Tap water enters the reverse osmosis system
  • The RO membrane reduces dissolved solids and many unwanted substances
  • Clean water exits the system
  • The Aero-Gro meter shows before-and-after readings
Tap WaterIncoming source water with variable quality
RO SystemMembrane and filters reduce dissolved material
Test ResultsThe 5-in-1 meter makes the change visible
Animation placeholder Replace this diagram with a Lottie animation, animated SVG, or short video later.
FAQ

Clean water, reverse osmosis, and meter testing questions

Can reverse osmosis filter out harmful substances?

Reverse osmosis can reduce a broad range of dissolved solids and many unwanted substances. Exact removal depends on the system, certification, water source, filter condition, and maintenance.

What can the Aero-Gro 5-in-1 meter detect?

The meter measures pH, TDS, EC, salinity, and temperature. These indicators help users understand water quality trends, especially before and after filtration.

Can the meter prove every contaminant is gone?

No. The meter is not a lab test for every contaminant. It is best used to track water-quality indicators and monitor filtration performance over time.

Why pair RO filtration with a meter?

RO improves water quality, and the meter gives you visible numbers. Together, they help people stop guessing and start tracking their water.

Cleaner water starts with knowing what is in it

Schedule reverse osmosis service and get a FREE Aero-Gro 5-in-1 meter.

Give customers a complete home water quality solution: professional RO installation, before-and-after testing, water quality education, and a practical tool they can keep using.